New DH54 Series Offset Disks

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereDH54 Series Offset Disks

Add Model --Please Select-- TRH-24S

Add Model --Please Select-- TRH-24S

Width	4.6 m 15 ft
Ground clearance with base blades
Wheel hub bearings	Dual tapered roller bearings
Height
Length

Approximate working width	4.3 m 14 ft
Maximum penetration

Net	5942.1 kg 13100 lb
Weight per disk blade	228.2 kg 503 lb

Recommended PTO hp range
Recommended drawbar hp range	223.7 kW 300+ hp

Type	Single offset rigid
Duty	Heavy
Tube size	17.8x17.8x0.95 cm 7x7x0.375 in.

Front hitch type	Pintle
Bolt-on rear hitch

Spacing	33 cm 13 in.
Quantity	26
Type	Notched (front) Notched (rear) Standard
Blade concavity

Blade option one	762x12.7 mm 30x0.5 in.
Blade option two	813x12.7 mm 32x0.5 in.
Blade option three
Blade option four
Blade option five
Blade option six

Front angle	3 positions
Rear angle	3 positions
Furrow fillers
Axle size	6.4 cm 2.5 in.
Axle material	Round heat treated alloy steel threaded on both ends
Bearing type	Oil bath tapered roller
Bearing wear plates	Standard
Bearing standards	Welded, Reinforced
Scrapers	Adjustable

Markings	SMV
Safety tow chain	Yes
Lights	Yes

Type	2 - Radial industrial
Size	385/65R22.5
Wheel hub type	5-Spoke dayton hubs

Labor hours	2-3 for two people

Time period	1 year